page 1 hpr4xx rev f 4/99 0.770.010" (19.560.25) 2 1 7 6 5 0.4000.010" (10.160.25) 0.140" (3.56) 0.180.015" (4.570.38) 0.020.002" (0.510.05) 0.2400.010" (6.090.25) 0.0100.002" (0.250.05) 0.0200.010" (0.510.25) 0.0350.015" (0.890.38) min 0.75 w at t m iniature sip dc/dc c onverter hpr4xx features ? high isolation voltage: 3000 v pk test single-in-line package (sip) internal input and output filtering low cost non-conductive case high output power density: 10 watts/inch 3 extended temperature range: -25c to +85c high efficiency: to 79% description the hpr4xx series uses advanced circuit design and packag- ing technology to realize superior reliability and performance. a 170khz push-pull oscillator is used in the input stage. the hpr4xx series reduces beat-frequency oscillation problems when used with high frequency isolation amplifiers. reduced parts count and high efficiency add to the reliability of the hpr4xx series. the high efficiency of the hpr4xx series means less internal power dissipation, as low as 190mw. with less heat to dissipate the hpr4xx series can operate at higher temperatures with no degradation of reliable operation. in addition, the high effi- ciency of the hpr4xx series means the series is able to offer greater than 10 w/inch 3 of output power density. operation down to no load will not impact the reliability of the series, although this product has a >1ma minimum load for specifica- tions purposes. the hpr4xx series provides high isolation in a very small package. the use of surface mounted devices and manufactur- ing technologies makes it possible to offer premium perfor- mance and low cost. product data sheet notes: all dimensions are in inches (millimeters). grid: 0.100 inches (2.54 millimeters) pin placement tolerance: 0.015" mechanical front view right side view bottom view 1. +vin 2. -vin 5. -vout 6. com* 7. +vout *common pins not present on single output models. pin connections internet: http://www.cdpowerelectronics.com power electronics division, united states 3400 e britannia drive, tucson, arizona 85706 phone: 800.547.2537 fax: 520.770.9369 power electronics division, europe c&d technologies (power electronics) ltd. 132 shannon industrial estate , shannon, co. clare, ireland tel: +353.61.474.133 fax:+353.61.474.141
page 2 hpr4xx rev f 4/99 ordering information hpr 4 xx /h device family hpr indicates dc/dc converter model number selected from table of electrical characteristics screening option specifications typical at t a = +25c, nominal input voltage, rated output current unless otherwise specified. electrical specifications note: other input to output voltages may be available. please consult factory common specifications specifications typical at t a = +25c, nominal input voltage, rated output current unless otherwise specified. nominal rated rated input current reflected input output output ripple voltage voltage current no load rated load current efficiency model (v dc) (v dc ) (ma) (ma) typ max (map-p) (%) hpr400 5 5 150 20 216 235 10 69 hpr401 5 12 62 20 212 235 5 70 hpr402 5 15 50 20 212 235 5 71 hpr403 5 5 75 20 218 245 5 68 hpr404 5 12 30 20 212 235 5 68 hpr405 5 15 25 20 220 220 5 75 hpr406 12 5 150 10 90 100 5 69 hpr407 12 12 62 10 81 90 5 77 hpr408 12 15 50 10 81 90 5 77 hpr409 12 5 75 10 88 98 5 71 hpr410 12 12 30 10 81 90 5 74 hpr411 12 15 25 10 81 90 5 77 hpr412 15 5 150 8 72 80 5 69 hpr413 15 12 62 8 72 80 5 69 hpr414 15 15 50 8 72 80 5 69 hpr415 15 5 75 8 72 80 5 69 hpr416 15 12 30 8 63 70 5 76 hpr417 15 15 25 8 63 66 5 79 hpr418 24 5 150 8 48 53 15 65 hpr419 24 12 62 8 48 53 15 65 hpr420 24 15 50 8 45 50 15 69 hpr421 24 5 75 8 45 50 15 69 hpr422 24 12 30 8 45 50 15 67 hpr423 24 15 25 8 45 50 15 69 parameter conditions min typ max units input voltage range 4.5 5 5.5 v dc 10.8 12 13.2 v dc 13.5 15 16.5 v dc 21.6 24 26.4 v dc isolation rated voltage 1000 v dc test voltage 60hz, 60 sec 3000 vpk resistance 10 g w capacitance 15 pf leakage current v iso = 240v ac , 60hz 2 7 arms output rated power 750 mw voltage setpoint accuracy rated load, nominal v in 5 % ripple & noise bw = dc to 10mhz 45 mvp-p bw =10hz to 2mhz 30 mv rms hpr403 bw = dc to 10mhz 90 mvp-p voltage 1 ma load, v out = 5v 7 v dc 1 ma load, v out = 12v 15 v dc 1 ma load, v out = 15v 18 v dc temperature coefficent .01 %/deg c regulation line regulation high line to low line 1 %/%v in load regulation (5v out only) rated load to 1ma load 10 % load regulation (all other models) rated load to 1ma load 3 % general switching frequency 170 khz frequency change over line and load 24 % package weight 2 g mttf per mil-hdbk-217, rev. e circuit stress method ground benign t a = +25c 7.9 mhr temperature specification -25 +25 +85 c operation -40 +100 c storage -40 +110 c absolute maximum ratings internal power dissipation..................................................................450mw short circuit duration....................................................................momentary lead temperature (soldering, 10 seconds max)................................+300c
page 3 hpr4xx rev f 4/99 typical performance curves specifications typical at t a = +25c, nominal input voltage, rated output current unless otherwise specified. safe operating area safe operating area rise time of input voltage (ms) load capacitance vs input rise time (5 vout models) total load capacitance (uf) 0 5 10 15 20 25 30 35 40 45 50 600 500 400 300 200 100 0 safe operating area rise time of input voltage (ms) load capacitance vs input rise time (12 vout models) total load capacitance (uf) 0 5 10 15 20 25 30 35 40 45 50 90 80 70 60 50 40 30 20 10 0 safe operating area rise time of input voltage (ms) load capacitance vs input rise time (15 vout models) total load capacitance (uf) 0 5 10 15 20 25 30 35 40 45 50 60 50 40 30 20 10 0 notes: 1.) when operated within the safe operating area as defined by the above curves, the output voltage of hpr4xx devices is guaranteed to be within 95% of its steady-state value within 100 milliseconds after the input voltage has reached 95% of its steady- state value. 2.) for dual output models, total load capacitance is the sum of the capacitances on the plus and minus outputs. vout vs load (5vout models) vout vs load (5vout models) vout vs load (12vout models) vout vs load (12vout models) vout vs load (15vout models) vout vs load (15vout models) 0 40 120 160 5.3 5.5 5.7 4.9 5.1 020406080 11.9 12.0 12.1 12.2 12.3 12.4 020406080 4.6 4.8 5.0 5.2 5.4 010203040 12.0 12.1 12.2 12.3 12.4 12.5 14.9 15.1 15.3 15.5 15.7 15.9 020406080 0 13.5 14.0 14.5 15.0 15.5 16.0 vout vout vout vout vout vout frequency (khz) 80 output current (ma) output current each load (ma) output current each load (ma) 12.5 output current each load (ma) 12.6 output current each load (ma) output power each load (watts) 0.2 0.4 0.6 0.8 1.0 16.5 0 40 80 100 60 20 90 75 60 45 30 15 0 efficiency vs load % of rated load (%) efficiency (%) oscillation frequency vs temperature 220 200 180 160 140 -30 0 30 60 90 temperature ( c)
|
